SUPER MICRO Computer X9DRD-iF, X9DRD-LF user manual CPU Monitoring, Fan Control

Chapter 1: Overview

	• Power-on mode for AC power recovery
	• Intel® Intelligent Power Node Manager (NM) (Available
		when the NMView utility is installed in the system)
	•	Management Engine (ME)
PC Health		CPU Monitoring
Monitoring	•	Onboard voltage monitors for 1.8V, +3.3V, 3.3VSB, +5V,
		+5V SB, +12V, Chipset Voltage, and Battery Voltage.
	• CPU 5-Phase switching voltage regulator
	• CPU/System overheat LED and control
	• CPU Thermal Trip support
	• Thermal Monitor 2 (TM2) support
		Fan Control
	• Fan status monitoring with firmware 4-pin (Pulse Width
		Modulation) fan speed control
	• Low noise fan speed control
System	•	PECI (Platform Environment Configuration Interface)
Manage-		2.0 support
ment
	• UID (Unit Identification)/Remote UID
	• System resource alert via SuperDoctor® III
	• SuperDoctor® III, Watch Dog, NMI
	• Chassis Intrusion Header and Detection
Dimen-	•	13.00" (L) x 10.30" (W) (330.20 mm x 261.62 mm)
sions

Note 1: For IPMI Configuration Instructions, please refer to the Embedded IPMI Configuration User's Guide available @ http://www.supermicro.com/ support/manuals/.

Note 2: Changing BMC log-in information is recommended during initial system power-on. The default username is ADMIN and password is ADMIN. For BMC best practices, please refer to: http://www.supermicro. com/products/nfo/files/IPMI/Best_Practices_BMC_Security.pdf

1-9