SUPER MICRO Computer X9DRD-LF user manual X9DRD-iF/LF Jumpers, Connectors

Chapter 1: Overview

Jumper

JBT1

JI2C1/JI2C2 JPB1 JPG1 JPL1 JPME1

X9DRD-iF/LF Jumpers
Description	Default Setting
Clear CMOS	See Chapter 2
SMB to PCI-E Slots	Off (Disabled)
BMC Enabled	Pins 1-2	(Enabled)
VGA Enabled	Pins 1-2	(Enabled)
GLAN1/GLAN2 Enable	Pins 1-2	(Enabled)
Management Engine (ME)	Pins 1-2	(Normal)
Recovery Mode Enable

JPME2 (X9DRD-iF)	Management Engine (ME)	Pins 1-2	(Normal)
	Manufacture Mode Select
JWD1	Watch Dog Timer Enable	Pins 1-2	(Reset)

	Connectors
Connectors	Description
COM1/COM2	Backplane COM Port1/Front Accessible COM2 Header
(COM1 only: X9DRD-LF)
(COM1/COM2: X9DRD-iF)
FAN1~8	CPU/System Fan Headers
(FAN1~6: X9DRD-LF)
(FAN1~8: X9DRD-iF)
I-SATA 0~5 (X9DRD-iF)	Four SATA 2.0 and Two SATA 3.0 Connectors from AHCI
I-SATA 0~1 (X9DRD-LF)	Two SATA 3.0 Connectors from AHCI
JBAT1	Onboard Battery (See Chpt. 3 for Used Battery Disposal)
JD1	Speaker/Power LED Indicator
JF1	Front Panel Control Header
JIPMB1 (X9DRD-iF)	4-pin External BMC I2C Header (for an IPMI Card)
JL1 (X9DRD-iF)	Chassis Intrusion
JOH1 (X9DRD-iF)	Overheat LED Indicator
JPI2C1	Power Supply SMBbus I2C Header
JPW1	24-Pin ATX Main Power Connector (Warning on Pg. 1-6.)
JPW2/3	12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
JPW4/5	12V 4-Pin Power Connectors (See Warning on Pg. 1-6.)
JSD1 (X9DRD-iF)	SATA DOM (Device on Module) Power Connector
JSTBY1 (X9DRD-iF)	+5V Standby Power Header
JTPM1	TPM (Trusted Platform Module)/Port 80

Note: PCI-E slots support Low-Profile MD2 form factor for devices/add-on cards that are shorter than 167.64mm or 6.59" (in) in length only.

1-5