Installing Replication Server
•Yes – to configure and start a sample Replication Server. InstallShield displays the configuration information for the sample Replication Server. Write this information down.
•No – to complete the installation and configure a
If you select No, you can configure and start a sample Replication Server after installation. See “Start the sample Replication Server” on page 40 for more information.
15Click Next. If you chose to configure and start a sample Replication Server, InstallShield displays the configuration information related to the sample Replication Server:
This page contains detailed information regarding the sample Replication Server. Please record this information.
The sample Replication Server will be called SAMPLE_RS and will run on port 11752. It will be configured with a user of sa and no password.
The sample Replication Server will use an embedded RSSD called SAMPLE_RS_ERSSD that runs on port 11751. It will be configured with a user of SAMPLE_RS_RSSD_prim and a password of SAMPLE_RS_RSSD_prim_ps.
The installer has updated the appropriate interfaces file or sql.ini file.
All files and logs associated with the sample Replication Server will be located in the directory
The sample Replication Server will be configured using the file
16Click Next. The Configure New Replication Server window displays the progress of the server configuration.
17Click Next. The Installation Completed window appears, verifying that the Replication Server software is now installed.
If you chose to start a sample Replication Server, it is started automatically. If you did not choose to start a sample Replication Server, you must configure and then start your Replication Server manually.
See the Replication Server Configuration Guide for UNIX for information about configuring your new Replication Server.
18Click Finish. The InstallShield wizard closes.
32 | Replication Server |
