Sybase 15 manual Installing in command line mode

CHAPTER 2 Installing Replication Server

❖Installing in console mode

The steps for installing components in an interactive text mode are the same as those described in “Installing in GUI mode” on page 28, except that you execute InstallShield from the command line using the setup -consolecommand, and you enter text to select installation options.

1 At the command line, enter:

•HP-UX and Solaris:

./setup -console

•IBM AIX:

./setup -console -is:javahome JVM

InstallShield starts and displays the welcome window as follows:

--------------------------------------------------

Welcome to the InstallShield Wizard for Sybase

Replication Server Software, Version 15.0.

The InstallShield Wizard will install Replication

Server Software, Version 15.0 on your computer.

To continue, choose Next.

Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]

-------------------------------------------------

2 Follow the remaining prompts to install Replication Server software.

Installing in command line mode

This section discusses the various installation methods available to you from the command line.

Note If the environment variable $SYBASE is set, the installer uses it as the default directory for installation. However, you can explicitly specify a different directory during the installation process to override $SYBASE.

Installation Guide for UNIX 33