Sybase 15 manual Start Adaptive Server for the Rssd, Start the sample Replication Server

Start Adaptive Server for the RSSD

Start Adaptive Server for the RSSD

To use the RSSD stored on Adaptive Server Enterprise, install the Adaptive Server Enterprise database, if you have not done so already. For installation instructions, see the Adaptive Server Enterprise Installation Guide for your platform.

After successful installation, start Adaptive Server Enterprise. For more information, see Chapter 2, “Starting and Stopping Servers” in the Adaptive Server Enterprise Configuration Guide for your platform.

Note If you are upgrading to a later version of Adaptive Server Enterprise and you have replicated databases, read Appendix B, “Upgrading Servers with Replicated Databases,” in the Adaptive Server Enterprise Installation Guide for your platform.

Start the sample Replication Server

During installation, InstallShield asks if you want to configure and start a sample Replication Server. InstallShield creates a resource file, $SYBASE/REP-15_0/samp_repserver/SAMPLE_RS.res, for the sample Replication Server and updates the interfaces file regardless of your choice. If you select No, you can still configure and start the sample Replication Server after installation using this resource file.

To create and start the sample Replication Server after installation, at the command prompt, enter:

$SYBASE/REP-15_0/install/rs_init -r\ $SYBASE/REP-15_0/samp_repserver/SAMPLE_RS.res

The rs_init utility displays commands as it executes them, and writes this output to its log.

If you encounter errors during configuration and start-up of the sample Replication Server, read this log file, $SYBASE/REP-15_0/init/logs/logmmdd.xxx, where:

•mm – is the month.

•dd – is the day.

40 Replication Server