AP-5131 Access Point Product Reference Guide
4-28
4.4.3 Configuring Specific SNMP Traps
Use the SNMP Traps screen to enable specific traps on the AP-5131. Symbol recommends defining
traps to capture unauthorized devices operating within the AP-5131 coverage area. Trap configuration
depends on the network machine that receives the generated traps. SNMP v1/v2c and v3 trap
configurations function independently. In a mixed SNMP environment, traps can be sent using
configurations for both SNMP v1/v2c and v3.
To configure specific SNMP traps on the AP-5131:
1. Select System Configuration - > SNMP Access - > SNMP Traps from the AP-5131 menu
tree.
2. Configure the MU Traps field to generate traps for MU associations, MU association
denials and MU authentication denials. When a trap is enabled, a trap is sent every 10
seconds until the condition no longer exists.
MU associated Generates a trap when an MU becomes associated with one of the
AP-5131’s WL ANs .
MU unassociated Generates a trap when an MU becomes unassociated with (or gets
dropped from) one of the AP-5131’s WL ANs .