
Configuring Access Point Security 6-33
2. Configure the Settings field as needed to override the settings in the Subnet Access screen and import firewall rules into the Advanced Subnet Access screen.3. Configure the Firewall Rules field as required add, insert or delete firewall rules into the list of advanced rules.Override Subnet 
Access settings
Select this checkbox to enable advanced subnet access rules and 
disable existing subnet access rules, port forwarding, and 1 to 
many mappings from the system. Only enable advanced subnet 
access rules if your configuration requires rules that cannot be 
configured within the Subnet Access screen.
Import rules from 
Subnet Access
Select this checkbox to import existing access rules (NAT, packet 
forwarding, VPN rules etc.) into the Firewall Rules field. This rule 
import overrides any existing rules configured in the Advanced 
Subnet Access screen. A warning box displays stating the 
operation cannot be undone.
Inbound or Outbound Select Inbound or Outbound from the drop-down menu to specify 
if a firewall rule is intended for inbound traffic to an interface or 
outbound traffic from that interface.
Add Click the Add button to insert a new rule at the bottom of the table. 
Click on a row to display a new window with configuration options 
for that field.
Insert Click the Insert button to insert a new rule directly above a 
selected rule in the table. Clicking on a field in the row displays a 
new window with configuration options.
Del (Delete) Click Del to remove the selected rule from the table. The index 
numbers for all the rows below the deleted row decrease by 1.
Move Up Clicking the Move Up button moves the selected rule up by one 
row in the table. The index numbers for the affected rows adjust to 
reflect the new order.
Move Down Clicking the Move Down button moves the selected rule down by 
one row in the table. The index numbers for the affected rows 
adjust to reflect the new order.
Index The index number determines the order firewall rules are executed. 
Rules are executed from the lowest number to the highest number.