AP-5131 Usage Scenarios B-9

B.1.2.2 BootP Priorities

The following flowchart displays the priorities used by the AP-5131 when the BootP server is
configured for multiple options:
If the BootP Server is configured for options 186 and 66 (to assign TFTP server IP addresses) the
AP-5131 uses the IP address configured for option 186. Similarly, if the BootP Server is configured for
options 188 and 129 (for the configuration file) the AP uses the file name configured for option 188.
B.2 Configuring an IPSEC Tunnel and VPN FAQs
The AP-5131 has the capability to create a tunnel between an AP-5131 and a VPN endpoint. The
AP-5131 can also create a tunnel from one AP-5131 to another AP-5131.
The following instruction assumes the reader is familiar with basic IPSEC and VPN terminology and
technology.
•Configuring a VPN Tunnel Between Two AP-5131s
•Configuring a Cisco VPN Device
•Frequently Asked VPN Questions
NOTE If the firmware files are the same, the firmware will not get updated. If
the configuration file name matches the last saved configuration file on
the AP-5131, the configuration will not get updated. Additionally, the LAN
port needs to be configured as a BootP client, as no BootP support exists
on the WAN port (WAN only supports DHCP).