Tascam MMR-8 owner manual Insert

Insert	Insert places the contents of the clipboard into the selected track(s) at the In point
	time, while moving all subsequent events “down stream” (later in time) by the
	length of the inserted event(s).
		Clipboard contents

In

Before Insert

After Insert

Out

					Audio after Insert is
					shifted later in time
Open	Open places a segment of silence into the selected track(s) equal to the time
	between the In point register and the Out point register. It functions like an Insert,
	slipping all subsequent material on the selected tracks downstream in time. Another
	way to say it is that all material on the selected tracks from the In point onward is
	moved (or rippled) so that it now begins at the time code location in the Out
	register. If the In point is within an audio segment on the track, the segment is split
	at the In point, with material before the In point remaining in place and material
	after the In point shifted to the position defined in the Out register.
		In		Out
		Register
			Register
	Before Open
Undo	After Open
	Undo un-does the last edit operation, which includes undoing the last recording that
	was ended by pressing the “stop” transport key (only in Non-Destructive Record).
	There are ten levels of undo available, accessed by selecting SHIFT and then
	pressing SEL7 one or more times (while the SHIFT key is active).
Redo	Redo re-does the last undo edit operation, including restoring recordings that were
	undone (only in Non-Destructive Record). There are ten levels of redo possible,

accessed by selecting SHIFT and then pressing SEL8 one or more times while the SHIFT key is active.

Undo and Redo put the time code registers and Selected tracks to the state they were in before the edit (undo) or after the edit (Redo).

MMR-8 Tascam MMR-8 Owner’s Manual • Chapter 3 • MMR-8 Operation 49