Tascam MMR-8 owner manual

The MMR Backup state is accessed via the Load Track state by pressing SHIFT+SLIP after choosing (scrolling to) the desired Project while in the LOAD TRACK state. This state is similar to the Setup state in that it has two menu choices which are accessed by using the Up/Down arrow keys or the Wheel. The key choices available in the Backup state are the same as those in the Setup state, hence it exists at the same level of the hierarchy of panel/display states as the Setup state.

Pressing the TRACK key activates the View Track state. This state allows for viewing the names of loaded tracks, and unloading of tracks (the shifted function of the TRACK key) from the loaded track list.

Pressing the SLIP key activates the Slip Track state. This state allows for slipping one or more of the already loaded tracks in time.

Verify state supersedes the Normal and Track states. The two most common Verify state functions are confirmation (a Yes/No answer is required from the user) and password entry (a password must be entered to complete the action request). Both of these requests override most other actions or do not allow access to the Normal, Setup, or Track states until they are cleared or a valid response is entered. Verify state, when cleared, usually drops the MMR-8 back into the previously active state.

Error state is the final level in the hierarchy of Panel/Display states. In this state, the ERROR status light flashes and the user is asked to clear a condition by pressing the CLR key, or if that is impossible (as in the case of a fatal error), to note the error information and possibly take some extraordinary action (such as re-starting the MMR-8). Until the Error state is cleared, or a valid response is entered, access to the Normal, Setup, or Track states is not allowed. The Error state, when cleared, may drop to another state, or to any appropriate condition—depending on the type and severity of the error.

These states are hierarchical in the sense that some require a response or they require a state to be cleared before certain keys or other states can be accessed. The Normal state is at the base of the hierarchy because it is the default on startup and can always be accessed from any other state or by pressing the CLR key as many times as is necessary to clear any other state. The track record arm function and the transport keys can be accessed directly from any state, so the MMR can always record and playback, regardless of what other functions or states are being accessed. The following diagram illustrates the hierarchical relationship between the various states, based on the number of choices available from each state.

Tascam MMR-8 Owner’s Manual • Chapter 1 • General Information MMR-8 13