Trimming Time Code Values

Any time a writeable register is shown in the bottom line of the display (usually by being recalled), it can be trimmed as required. There are two types of trimming: static and dynamic. Dynamic trim is desirable only in certain special situations, and differs from static trim in that the register values are sent to the transport immediately as they are changed. In static trim, register values are sent to the transport at the point where trim mode is exited. Note that Trim mode cancels Jog or Shuttle modes, if active, since Trim, Jog, and Shuttle are mutually exclusive.

To trim the time code in the active register, press TRIM (for static trim) or SHIFT+TRIM (for dynamic trim). The TRIM LED will flash slowly (static trim) or flash quickly (dynamic trim) to indicate trim mode is active. Rotate the Wheel clockwise or press the up-arrow key to increment the time code numbers, or rotate the wheel counterclockwise or press the down-arrow key to decrement the time code numbers.

When the desired value is reached, press TRIM again to exit trim mode. This saves the value as trimmed, while continuing to display the register last trimmed. If you don’t want to save the trimmed value, exit trim mode by pressing CLR. This cancels Trim mode and restores the register to its pre-trimmed value.

Using the Entry Register

In the Normal state, the bottom line of the LCD typically displays the entry register. This register is used for manual time code entry from the keypad. It can be used to update memory registers and the writeable special-purpose registers. Once time code is displayed in the entry register, the MMR-8 can be immediately located to that time by pressing the LOC key. The following methods may be used to enter time code into the entry register while in the Normal state):

Direct time code Use the numeric keys to type in the time code. The keyed time code will replace

entry any existing time code in the display. Use this method if the time code position is known. Pressing CLR will reset any existing time code in the register to zero, making it easier to enter new time code numbers.

Capture the Press CAPT during play, record or while stopped. This copies the “play head”

time code time code shown in the top line, at the moment the CAPT key is pressed, to the entry register on the bottom line.

Recall, Trim, Recall and trim one of the ten memory registers (using RCL+0 - 9), or one of the

and Store special-purpose registers (using RCL+SHIFT+0 - 9), and press the STO key. The

a Register register time code value is then copied to the entry register.

The time code value in the entry register can be trimmed, as required, by using the Wheel or Up/Down arrow keys to increment or decrement the time code before any other action is taken on the time code.

MMR-8

Tascam MMR-8 Owner’s Manual • Chapter 3 • MMR-8 Operation

65

Page 70 Page 72
Page 71
Image 71
Tascam MMR-8 owner manual Trimming Time Code Values, Using the Entry Register
Page 70 Page 72

MMR-8 specifications

The Tascam MMP-16 and MMR-8 are two innovative products designed to meet the specialized needs of audio professionals, offering advanced features and capabilities suitable for various recording and playback applications.

The Tascam MMP-16 is a versatile audio router and mixer that excels in different environments, from live sound to studio recording. One of its primary features is the 16-channel configuration, allowing for significant flexibility in signal routing. The MMP-16 supports multiple audio formats, including analog signals, making it adaptable to a wide range of setups. It boasts high-quality AD/DA conversion, delivering excellent audio fidelity and low latency performance.

Additionally, the MMP-16 is equipped with comprehensive digital processing capabilities, including EQ and dynamics processing on each channel. This makes it ideal for both mixing live performances and preparing recordings for post-production. The unit's user-friendly interface includes an intuitive display and physical controls that streamline operation, making it easy for both novice and experienced engineers to navigate.

On the other hand, the Tascam MMR-8 is a robust multi-track digital audio recorder that offers exceptional reliability for professionals who require high-quality audio capture. This 8-channel recorder shines in its ability to handle various digital audio formats, ensuring compatibility with different workflows. One standout feature of the MMR-8 is its solid-state recording technology, which enhances durability and reduces the risk of data loss, a crucial aspect in high-stakes recording environments.

The MMR-8 also provides comprehensive onboard monitoring options, allowing users to assess audio quality in real time. Its extensive connectivity options include digital and analog inputs and outputs, facilitating seamless integration with other studio equipment and live sound systems. The data management capabilities of the MMR-8 make it easy to organize and retrieve recordings, while its compact design ensures portability without compromising on performance.

Both the MMP-16 and MMR-8 showcase Tascam's commitment to innovation and quality in the audio industry. Their advanced features, coupled with solid build quality and ease of use, make them essential tools for audio professionals seeking reliable solutions for their recording and mixing needs. Whether utilized separately or in conjunction, these devices amplify creativity and enhance the overall audio production experience.
Top Page Image Contents