Taurus Group 60 Lube Oil Cooler, 9.1.8Lube Oil System Options, Lube Oil Immersion Tank Heater, 9.1.7Lube Oil Vent Flame Arrestor, Table 9. Lubrication System Specifications

Turbomachinery Package Specification Taurus 60 Compressor Set and Mechanical Drive

9.1.7Lube Oil Vent Flame Arrestor

The lube oil vent flame arrestor prevents an ignition source from entering the lube oil tank. The flame arrestor is loose shipped for offskid installation by others.

9.1.8Lube Oil System OptionsLube Oil Cooler

An air-to-oil type cooler is available to provide oil cooling for the gas turbine and the driven equipment. The cooler is sized for specified heat loads and ambient temperatures and is designed for a 22.2°C (40°F) approach temperature. The cooler is loose shipped for offskid installation by others.

Lube Oil Immersion Tank Heater

The lube oil tank immersion heater ensures the lube oil tank temperature is adequate for starting in cold conditions. The tank heater also facilitates a short lube oil temperature warm up period after a cold start. Electrical supply contactors are not included.

Table 9. Lubrication System Specifications

Main Lube Oil Pump

Pump Type	Engine-Driven Rotary Screw
Flow	1060 lpm (280 gpm)
Discharge Pressure	607 kPag (88 psig), See Note (a)
Pre/Post Lube Oil Pump
Pump Type	AC Motor-Driven Centrifugal
Optional Motor Voltage Ratings	380 VAC, 400 VAC, and 415 VAC (50 Hz)
	460 VAC and 575 VAC (60 Hz)
Motor, Power	7.5 kW (10 hp)
Backup Lube Oil Pump
Pump Type	DC Motor-Driven Centrifugal
Motor Voltage Rating	110 VDC
Motor, Power	0.9 kW (1.2 hp)
Lube Oil Cooler
Lube Cooler Oil Volume (Per Cooler)	Project Specific
Design Heat Load (Per Cooler)	Project Specific
Design Oil Flow Rate (Per Cooler)	Project Specific
Air Flow Rate	Project Specific, See Note (b)
Maximum Ambient Temperature	43°C (110°F)
Maximum Design Lube Oil Cooler Outlet	66°C (150°F)
Temperature
Maximum Lube Oil Cooler Design Pressure Drop	173 kPag (25 psig), See Note (c)
Minimum Lube Oil Cooler Design Pressure	1 035 kPag (150 psig)
Optional Motor Voltage Ratings	380 VAC, 400 VAC, and 415 VAC (50 Hz)
	460 VAC and 575 AC (60 Hz)
Optional Motor, Power	7.5 kW (10 hp), 15 kW (20 hp), or 2 x 15 kW (20 hp)
Lube Oil Tank Immersion Heater, See Note (d) and (e)
Optional Voltage Ratings	380 VAC, 400 VAC, and 415 VAC (50 Hz)
	460 VAC (60 Hz)
Power	3-Phase VAC, 10 kW
Minimum/Maximum Regulated Supply Pressure	100 to 225 psig (689 to 1551 kPag)
Maximum Flow Demand Rate	4.67 nm3/min. (165 scfm)
© 2009 Solar Turbines Incorporated. All rights reserved.	TPS60CSMD/309

31