Taurus Group 60 10.5.8Engineering Units, 10.5.7System Programmability, Table 10. Turbotronic 4 Control System Specifications

Turbomachinery Package Specification Taurus 60 Compressor Set and Mechanical Drive

are available for transmittal. Interface modules mount in the controller rack and connect through the rack’s backplane. Available connections are:

•ControlLogix 1.5

•Ethernet

•Data Highway Plus

•Modbus

10.5.7System Programmability

The Turbotronic 4 system is fully programmable in the field. Programming requires a licensed copy of Rockwell Automation’s RSLogix 5000 software installed on a suitable computer with the corresponding interface card installed. Solar offers two standard options:

Software, instruction manual, interface card, and connecting cable.

Fully configured portable computer with the software, instruction manual, interface card, and connecting cable

10.5.8Engineering Units

The following engineering unit options are available for the screen displays:

	Metric 1	Metric 2	Metric 3	English
Pressure	kPa	bar	kg/cm3	psig
Temperature	°C	°C	°C	°F

Table 10. Turbotronic 4 Control System Specifications

Temperature Monitoring

Resistance Temperature Device (RTD)	100 ohm Platinum
Turbine T5	6 Thermocouples
Turbine Air Inlet	Resistance Temperature Device (RTD)
Turbine Lube Oil Header	RTD
Turbine Lube Oil Tank	RTD
Turbine Gas Producer Thrust Bearing	RTD (1 connected and 1 spare)
Turbine Power Turbine Thrust Bearing	RTD (1 connected and 1 spare)
Turbine #1 Bearing Drain	RTD (1 connected and 1 spare)
Turbine #2 and #3 Bearing Drain	RTD (1 connected and 1 spare)
Turbine #4 and #5 Bearing Drain	RTD (1 connected and 1 spare)
Compressor Driver End Bearing (If Applicable)	RTD (1 connected and 1 spare)
Compressor Driven End Bearing (If Applicable)	RTD (1 connected and 1 spare)
Vibration Monitoring
Turbine Bearing #1	Displacement Probes, X and Y axis
Turbine Bearing #2	Displacement Probes, X and Y axis
Turbine Bearing #3	Displacement Probes, X and Y axis
Turbine Bearing #4	Displacement Probes, X and Y axis
Turbine Bearing #5	Displacement Probes, X and Y axis
Turbine Rotor Shaft	Displacement Probe, Axial Position
Turbine Gas Producer Rotor Shaft	Keyphasor
Turbine Power Turbine Rotor Shaft	Keyphasor
Compressor Bearing Driven End	Displacement Probes, X and Y axis
Compressor Bearing Driver End	Displacement Probes, X and Y axis
Gearbox (If Applicable)	Acceleration Probe
	Displacement Probes, X and Y Axis (Optional)
© 2009 Solar Turbines Incorporated. All rights reserved.	TPS60CSMD/309

42