
Turbomachinery Package Specification | Taurus 60 Compressor Set and Mechanical Drive |
|
|
1 Introduction
1.1General Description
Solar Turbines Incorporated is a worldwide leader in the design, manufacture, and installation of industrial gas turbines. Solar's 40 years of experience integrating high technology with fluid compression, liquid pumping, power generation, and cogeneration applications has resulted in more than 12,500 gas turbine installations in 93 countries around the world. Solar gas turbine packages have logged more than 1.3 billion operating hours around the world in a wide range of applications. Solar gas turbine packages are complete packaged systems that require a minimum of site preparation prior to installation.
Taurus 60 compressor sets and mechanical drives represent years of intensive engineering and manufacturing design. Solar gas turbines are manufactured to rigid industrial standards and are thoroughly tested in modern facilities. Solar's operations are certified by Det Norske Veritas (DNV) to conform to International Standardization Organization (ISO) 9001:2000 Standard for Quality Management Systems.
1.2Overview
This document describes product features and provides turbomachinery package specifications for Taurus 60 compressor sets and mechanical drives. Presented within this booklet are basic package configurations, ancillary descriptions, installation requirements, and a list of customer support services available at the time of publication. Please note that changes in equipment, service descriptions, and specifications may occur without prior notice.
1.3Terminology
In describing different package configurations, Solar uses the term “Mechanical Drive” to cover the gas turbine packaged on a skid with all the required accessory equipment required for operation. The term “Compressor Set” is used when the mechanical drive package is combined with a Solar gas compressor packaged on its own skid. Compressor Sets are fully integrated packages, although the driver and driven packages may be shipped separately for logistical reasons. When the mechanical drive is provided for use with a third party’s driven equipment, typically either a gas compressor or a pump, Solar will work with the driven equipment supplier to ensure that the two packages are properly interfaced. Control and monitoring of the driven equipment is usually in Solar’s scope of supply and will be integrated into the Turbotronic control system.
© 2009 Solar Turbines Incorporated. All rights reserved. | TPS60CSMD/309 |
5