16 Model H63Important: Tothe Operator
Pressing the <-- -- arrow key or t he -- --> arrow key
will move the cursor left or right respectively. Pressing
the MENU/SEL key while under “ENABLE” will acc ept
the selection and will automatically increase the clock
onehour at 2:00 a. m. on thef irst Sunday in every April.
It will decrease one hour at 2:00 a.m. on the last
Sunday in every October. Pressing the MENU/SEL
key while under “DISABLE” will accept the selection
and operate normally. Pressing the MENU/SEL key
again will accept the selection and return to the
OPERATOR MENU.
Screen “D” is SYSTEM INFORMATION. The first
screen will indicate the software version used in the
unit.
SOFTWAREVERSION
H63 Control UVC2
Version 2.00
SEL
Press the MENU/SEL key to view the second screen
of the SYSTEM INFORMATIONdisplay. This screen
will indicate the version number and number of
language strings.
Language
V1.10r00 English 457
SEL
Press the MENU/SEL key to view the third screen of
the SYSTEM INFORMATION display.This screen will
indicate the Bill of Material number and serial number
for the unit. Press the MENU/SEL key once to return
to the Operator Menu.
B.O.M. 0H6333C000
S/N K0000000
SEL
Screen “E” is AUTO HEAT TIME. This screen isused
to set the time of day in which the heat treatment cycle
will start. Move the cursor under t he number you wish
to change. Press the plus key to increase thenumber;
press the minus key to decrease the number. When
the desired time appears, press the MENU/SEL key
once to return to the OPERATOR MENU.
AUTO HEATTIME
TIME: 12:00 AM
-- --
<------ ------> +++ ------ SEL
Screen “F” is CURRENT CONDITIONS. This screen
gives the viscosity of theproduct andthe hopperand
barrel temperatures. The last line of the display isthe
compressor countdown safety timer. The safety timer
prevents the compressor from running more than 11
minutes (other than during the cooling phase of the
heat treatment cycle).
Press the MENU/SEL key once to view the
SERVINGS COUNTER screen.
VISC HOPPER BARREL
0 38.5 28.5
TIME C 11:00 11:00
The SERVINGS COUNTER screen indicates the
number of times the draw swit ch has closed (number
of draws) since the last brush cleaning or since the last
serving counter reset. A maximum of 32,767 draws
can be recorded; an additional draw will cause the
counter to restart at zero. Pressing t he MENU/SEL key
will return the display to the Operator Menu.
SERVINGS COUNTER
DRAWS
12
SEL
Draws are counted during the AUTO mode of
operation only.