TC electronic SDN BHD P2 manual Eq Page, EQ Page, Introduction, Basic operation, Type Selector

EQ PAGE

EQ Page

Introduction

This digital EQ features a three-band parametric EQ with high- and low-pass filters switchable between Notch, Parametric, Shelving and Cut filters. The needle sharp notch filter has a range down to 0.01 octave and the shelving filters has a variable slope, ranging from gentle 3 dB/oct over 6 and 9 to 12dB/oct. Cut filters are switchable between 12dB/oct maximum flat amplitude (Butterworth) or flat group delay (Bessel) types. The parametric equalizer features a natural and well defined bandwidth behavior at all gain and width settings.

Basic operation

•Press keys Lo, Mid and Hi to activate/deactivate the EQ bands.

•Select Freq, Gain, Type or Lo/Hi to access all four parameters on individual bands.

•Press Bypass EQ to bypass all three bands.

Type Selector

•Press Type and use faders 1-3 to select filter types.

For Lo and Hi filters select between filter types: Parametric, Notch, Shelve and Cut.

For the Mid filter select between filter types: Parametric and Notch.

Parametric Filter - Broad type

28