LIMITERAPPENDIX
peaks from reaching the Output, and time- constants adapt to the Input signal.
Fader A & Fader B Parameter range: Off to 0dB
Fader function on the Output. When Dual Mono configuration is selected, individual Output faders are available.
Reset menu
& software load
To enter the following functions hold WIZARD key while powering up the unit. Once entered this menu navigation is as follows:
•Press PRESET keys 4 and 8 to scroll in menu.
•Press LOCK to confirm/enter
•Press BYPASS to cancel
“L” - Load
Indicates Load mode and is used when loading application software.
Press LOCK (enter) to load the information present in the inserted PCMCIA card.
“R” - Reset
Press LOCK (enter) to reset the unit. When LOCK is pressed once the “R” in the display will start to flash and the unit is ready to be reset.
You can now abort/cancel the operation by pressing the BYPASS key or press LOCK a second time to actually reset the unit.
While resetting a “+” is displayed.
“A” - Boot software version
Press LOCK (enter) to see current loaded boot software version.
For
“V” - Operating software number
Press LOCK (enter) to see current loaded P2 software version.
“N” - Serial Number
Press LOCK (enter)to see serial number for this unit.
“S” - Start
Reboots the P2 for normal use.
When rebooted after a Reset procedure has taken place all Front Presets are reconfigured. The reconfiguration process takes approx. 15 seconds during which the eight PRESET key LEDs will flash. Be patient.
33
