Teac AG-790 owner manual Radio Reception, FM MODE Button, English

Radio Reception

3 4

21

1Press the TUNER button.

2Select AM or FM by pressing the BAND button.

3If “CH” indicator is lit, press the TUNING MODE button to select the manual tuning mode.

The “CH” indicator disappears from the display. This button is used to change the tuning mode.

4Select the station you want to listen to (auto selection).

Hold down the TUNING/PRESET button for 0.5 to 2 seconds. When a station is found, the tuning process will stop automatically.

If you want to stop the tuning process, press the TUNING/PRESET button.

Selecting stations which cannot be tuned automatically (manual selection)

When the TUNING/PRESET button is pressed momentarily (0.5 second or less), the frequency changes by a fixed step.

Press the TUNING button repeatedly until the station you want to listen to is found.

<“TUNED” is displayed when a broadcast is correctly tuned in.

FM MODE Button

Pressing this button alternates between Stereo mode and Mono mode.

Stereo

FM stereo broadcasts are received in stereo.

The “STEREO” indicator lights on the display when an FM stereo broadcast is tuned in.

<If the sound is distorted and the “STEREO” indicator light flashes, the signal is not strong enough for good stereo reception. In this case, change to MONO mode.

Mono

To compensate for weak FM stereo reception, select this mode. Reception will now be forced monaural, reducing unwanted noise.

ENGLISH

13