Teac AG-790 Preset Tuning, Manual Memory Presetting, Memory Backup, How to select preset stations

Preset Tuning

TUNING MODE TUNING/PRESET

BAND MEMORY

Manual Memory Presetting

You can store FM and AM stations from Channel 1 to 30 respectively.

1Tune in a station you want to listen to (see steps 1 to 4 of page 13).

2Press the MEMORY button.

3While the “MEMORY” indicator is blinking, select a preset channel to store the station using the TUNING/PRESET buttons, and then press the MEMORY button.

To store more stations, repeat steps 1 to 3 .

Memory Backup

If the POWER switch of the main unit is turned off or the power supply is interrupted for 3 days or longer, all the settings kept in memory (such as preset stations) will be erased.

To avoid loosing your preset stations, it is advisable to keep your AG-790 in the STANDBY mode when not in use.

How to select preset stations

1Select AM or FM by pressing the BAND button.

2If “CH” indicator is not lit, press the TUNING MODE button to select the preset tuning mode.

3Select a preset channel using the TUNING/PRESET buttons.

Memory Scan

1. Select AM or FM by pressing the BAND button.

2.Press the MEMORY SCAN button of the remote control unit.

The preset channels stored in memory are scanned at 5 seconds intervals. When the station you want to listen to is found, press the MEMORY SCAN button again to stop scanning.

<A preset channel with no signal will be skipped.

14