Cómo ajustar el temporizador 2
PROGRAM/ENTER
FUNCTION/REC LEVEL/SELECT
MP3
< This unit can play MP3 files recorded on a |
storage device or SD memory card. |
< File names of MP3 should be alphanumeric characters. This |
unit cannot display symbols and |
characters (such as Japanese, Chinese, etc.) correctly. Also, be |
sure to use the file extension (.mp3). |
< MP3 files are mono or stereo |
format. This unit can play MP3 files with sampling frequency |
16 to 48 kHz, |
< Folder name, file name and ID3 tag (title, artist and album) |
can be displayed up to 30 characters. |
Remote Control Unit
The provided Remote Control Unit allows the unit to be operated from a distance.
Before using the remote control unit, pull out protection sheet from the battery compartment.
When operating the remote control unit, point it towards the |
REMOTE SENSOR on the front panel of the unit. |
< Even if the remote control unit is operated within the effective |
OFF time
Establezca la hora de parada de la grabación o reproducción.
El tiempo de apagado (OFF) predeterminado es 1 hora más tarde que el tiempo de encendido (ON).
1Pulse varias veces el botón 
para seleccionar el tiempo OFF.
“OFF TIME” aparece durante unos pocos segundos.
2Pulse el botón PROGRAM/ENTER. El valor “hora” empieza a parpadear.
3Establezca el tiempo de parada (hora) girando el botón
FUNCTION/REC LEVEL/SELECT.
4Pulse el botón PROGRAM/ENTER. El valor “minuto” parpadea.
5Establezca el tiempo de parada (minuto) girando el botón FUNCTION/REC LEVEL/SELECT.
6Pulse el botón PROGRAM/ENTER.
Fuente
Establezca la fuente que desea escuchar en la hora establecida.
1Pulse varias veces el botón 
para seleccionar
SOURCE.
“SOURCE” aparece durante unos pocos segundos.
2Pulse el botón PROGRAM/ENTER. La fuente actual parpadea.
3Seleccione la fuente girante el botón FUNCTION/REC LEVEL/SELECT.
< Audio encoded at 128 Kbps should sound close to regular |
audio CD quality. Although this player will play lower |
MP3 tracks, the sound quality becomes noticeably worse at |
lower |
Discs
<The disc must be finalized in order to play.
<The
<When more than 255 files are recorded on the disc, the unit might not be able to play it correctly.
USB/SD
<This unit supports USB 1.1 FULL SPEED (12Mbps).
<This unit can play MP3 files recorded in SD memory card or various external USB storage devices such as USB flash memory. But this unit don’t support playback or recording of MP3 players.
<When more than 1000 files are recorded on the USB memory or SD memory card, the unit might not be able to play it correctly.
<The unit might not be able to play over 1GB SD memory card.
<The unit might not be able to play MP3 memory player via the
USB
range, remote control operation may be impossible if there |
|
are any obstacles between the unit and the remote control. | ENGLISH |
< If the remote control unit is operated near other appliances | |
|
which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly.
Battery Installation
1Remove the battery compartment cover.
2Insert a lithium dry battery (CR2025). Make sure that the battery is inserted with its positive “+” and negative “_” poles positioned correctly.
3Close the cover.
Battery Replacement
If the distance required between the remote control unit and main unit decreases, the battery is exhausted. In this case, replace the battery with a new one.
Precautions concerning batteries
<Be sure to insert the battery with correct positive “+” and negative “_” polarities.
<When the remote control unit is not to be used for a long time (more than a month), remove the battery from the remote control unit to prevent it from leaking. If it leaks, wipe away the liquid inside the battery compartment and replace the battery with new one.
<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.
94 | 7 |
