When a MIDI message is received at the MIDI IN terminal of the BRC it is immediately transferred as a through output from the MIDI OUT terminal. To send MIDI data through the BRC, press the MIDI/UTIL switch several times on the front panel of the BRC to display the 1:MIDI ECHO screen, then select ‘ON’ using the arrow keys.
Timecode
To generate MTC from the BRC, press the EDIT switch and then press the GEN SYNC switch until the MIDI screen appears. Select MTC, and turn the GEN SYNC switch to ON.
To generate SMPTE timecode from the BRC, press the EDIT switch and then press the GEN SYNC switch until the SMPTE screen is displayed. Set to
To generate timecode from the BRC when the ADAT is in FF/REW operation, press the MIDI/UTIL switch on the front panel of the BRC until #8 is displayed. Output Rew/FF SMPTE AND MTC: Screen, and select to ‘ON.’
2.4 DA-98, 88, 38
Connections
When making connections between the DA98, 88, 38 and the
Set the dipswitches on the
(SW1) | ON, (SW2) OFF: | When the |
(SW1) | OFF, (SW2) OFF: | When the |
To receive a digital signal on the
When multiple DA98, 88, or 38s are connected, set the machine ID to ‘1’ (‘0’ in the case of DA- 88s) on the first unit (master unit). The machine IDs of the slave units should be set sequentially, starting with ‘2’ subsequent to the units connected using the
The machine ID for the
When multiple DA98, 88, 38s are connected using the
Wordclock
When the
To set the clock selection to INT, WORD, or VIDEO press the CLOCK switch on the front panel of the
specified below.
ID=1 | |
ID=0 |
To use a
9
