2 SpeedTouch™ Web Interface

NAT Clicking this button displays the Network Address and Port Translation (NAPT) page. This page allows you to:

View or add/delete specific static NAPT entries:

You can add static NAPT entries by clicking New. Specify the outside address and inside address for the entry as well as the protocol and port to which the entry applies. If the NAPT entry is applied to a connection's dynamically assigned local peer IP address, you should specify 0.0.0.0 as the outside address. Click Apply to add the entry to the table.

Define a default server:

By specifying a default server IP address, all incoming connections will be forwarded to the device with this IP address. This setting should be adequate for most server applications and eliminates the need for specific static NAPT entries.

Note: Do not forget to save your changes to persistent memory by clicking “ Save all” .

3EC 37891 AAAA TCZZA Ed. 01

31

 

Page 35
Image 35
Technicolor - Thomson 510, 510i, 530 manual 3EC 37891 Aaaa Tczza Ed