3 SpeedTouch™ System Software Upgrade
Step | Action |
5The Setup wizard should find your SpeedTouch™ device on the local network. This is indicated by the following window:
In case more than one SpeedTouch™ device is found, a listing is provided from which you can select your SpeedTouch™ from.
Note: If the Setup wizard does not find any SpeedTouch™ on the network an error window pops up. In this case check:
•That the computer is not connected to the SpeedTouch™ via its USB interface
•Whether your computer is correctly connected to the SpeedTouch™ via its Ethernet port.
•That no dedicated firewall device or router is placed between your PC and the SpeedTouch™ and that no personal firewall software is running on your PC.
•Whether the SpeedTouch™ is turned on and fully initialized.
To repeat the search for the SpeedTouch™, click Back and proceed with step “4 ” of this procedure.
6Once the SpeedTouch™ Setup wizard has detected your SpeedTouch™ device you can proceed with the upgrade procedure.
If more than one SpeedTouch™ device is listed, select the appropriate one. Then, click Next to proceed.
36 | 3EC 37891 AAAA TCZZA Ed. 01 |
|
