TechniSat HD S2X manual Loading EPGplus data, Ending the installation assistant

Models: HD S2X

1 92
Download 92 pages 30.74 Kb
Page 17
Image 17
Loading EPGplus data

All the satellites included in your antenna configuration will be scanned for Programmes. This procedure may take a few minutes. Please note any messages displayed on screen.

Loading EPGplus data

Your digital receiver has an Electronic Programme Guide, EPGplus Electronic Programme Guide. Your receiver must first download the EPGplus data from the satellite in order for the Electronic Programme Guide data to be displayed.

Your receiver will start loading the EPGplus data automatically for this purpose after the programme list update or programme scan has finished. This procedure can take up to 30 minutes.

>If you do not want to wait for the EPGplus data to load, you can skip the process. To do this, press the yellow function key Skip.

The EPGplus data will then be updated automatically the following night, or you can update it manually at any time (see Point 7.16.1).

Ending the installation assistant

>Confirm the final message of the installation assistant by pressing the green function key Finish, to return to normal operation.

5

17

Page 17
Image 17
TechniSat HD S2X manual Loading EPGplus data, Ending the installation assistant