7.4 Volume control
You have the facility to adjust the volume of your digital receiver. This facilitates the easy operation of the receiver, as it means you have all the important functions on a single remote control, and will only rarely have to resort to using the remote control of the television set. When you switch on the digital receiver, sound will be reproduced at the volume level last set.
>To adjust the volume of your digital receiver, press Volume + to increase the volume, and Volume - to decrease it.
>To switch the sound off (mute), press the key Sound on/off press the key again to switch the sound on again
Please note:
The volume of the digital audio outputs cannot be adjusted.
7.5 Selecting a different language
If a programme is being broadcast in several languages, or with several audio channels, this will be indicated by a message displayed on screen.
You can then proceed to set a different language or another audio channel as follows:
> | Press the key Language selection. |
| |
| |||
| A list indicating the languages currently being broadcast will appear on the screen. | 7 | |
> | Use the arrow keys up/down to mark the desired language, and confirm by | ||
| |||
| pressing OK. |
| |
|
| ||
| You can now proceed to listen to the programme in the language selected. Your | ||
| digital receiver is also capable of receiving mono Programmes. | ||
> | Use the arrow keys left/right to select Mono channel 1 ( ), Mono channel | ||
| 2 ( ) or Stereo ( ). | ||
7.5.1 Dolby Digital
If a programme is being broadcast in Dolby Digital Sound, this will be indicated when you switch to the programme, as the Dolby logo will be displayed in the Infobox. Provided you have enabled the Dolby Digital function in accordance with Point 6.3.6, the programme will automatically be reproduced in this sound format.
If you have not turned on the Dolby Digital function then proceed as follows for manual Dolby Digital of your appliance:
>Press the key Language select.
If any are being broadcast, a list of the currently broadcast languages as well as Dolby Digital (AC 3) will be displayed on screen.
>Use the up/down arrow keys to mark the line Dolby Digital.
>Confirm by pressing OK.
You can now listen to the programme in Dolby Digital sound. If you want your appliance to automatically reproduce programmes in Dolby Digital then set you appliance, as described under point 6.3.6, for automatic Dolby Digital reproduction.
7.6 TV/Radio switching
The
31
