>To go to a specific point in a currently running recording, you can use the functions Play, Pause as well as Fast Wind and the Jogshuttle, as described in Point 8.2.
>Press the Info key to display the Infobox with a progress bar, showing the playing and recording time elapsed.
8.1.4 Setting markers while recording
>Press the Record key to open a window showing the functions available.
>Use the arrow keys up/down to mark the line Set mark, confirm by pressing
OK.
A marker will now be set at the current position. Continue in this manner to set markers at all desired places. Markers can also be set during Playback mode (Point 8.2.1.5) as well as in the menu Manage hard drive (Point 8.3.1.3).
8.2 Playback function
You can access hard drive recordings through the hard drive (PVR) navigator.
8.2.1 Playing back recordings
8.2.1.1 Reproducing hard drive recordings
>While in normal operating mode, press the green function key to open the PVR navigator. Depending on whether you are in TV or radio mode, a list of all TV or radio recordings available on the hard drive will be displayed.
The marked recording will already be played back in the preview window.
>Use the arrow keys up/down to select the recording you wish to play.
>Confirm by pressing OK, to start the playback procedure. The message “Play ” will be displayed briefly.
Recording information
>Call up the PVR navigator as described in Point 8.2.1.1.
>Using the arrow keys mark the recording on which you wish to access more information.
>By pressing the yellow status function key the information on the market recording will be faded in.
>Press the Return key to go back to the PVR navigator.
Recording a broadcast, and at the same time playing an existing recording
In addition, you can play an existing recording from the hard drive simultaneously with a new recording being stored.
>While a recording is in progress, call up the PVR navigator as described in Point 7.2.3.
>Use the arrow keys up/down to mark the recording you wish to play, and start the
8
47
