TechniSat HD S2X manual Zoom picture, EPGplus Electronic Programme Guide, Change PIP pictures

Models: HD S2X

1 92
Download 92 pages 30.74 Kb
Page 35
Image 35
Change PIP pictures

-to simultaneously reproduce two programmes (1 programme in HD format and 1 programme in SD format or 2 programmes in SD format) even if these are received from differing fields of reception.

-to reproduce a programme of your choice and simultaneously reproduce a hard drive recording of your choice.

If only one connector is available for an antenna supply line then the reproduction combinations will only be of limited availability.

-simultaneously reproduce two programmes (1 programme in HD format and

1 programme in SD format or 2 programmes in SD format) from the same reception field.

-reproduce any programme of your choice and simultaneously reproduce any hard drive recording of your choice

Change PIP pictures

>Press the Back key to exchange the two pictures. The PIP picture will be displayed as the main picture, and vice versa.

Switch off PIP operation

>Switch “Picture in Picture” mode off by pressing the PIP key again.

The large main picture will be hidden and the small (PIP) picture will be displayed as the new main picture.

or

>Press the TV/Radio key. The small (PIP) picture will be hidden and the main picture is displayed unchanged

7.15 Zoom picture

Using this function you can display 4:3 programmes on your 16:9 television set fully and true to the format. The same applies to 16:9 programmes, which are not transmitted signalised as such (no 16:9 symbol in the Infobox, see Point 7.2.5). Important prerequisites for this zoom function are, however, that the digital receiver is set to 16:9 operation according to Point 6.3.1 and your television set supports 16:9 signalisation over the scart socket.

>First press the Option key.

Sound selection will appear on the screen.

>With repeated pressure on the blue zoom function key various zoom factors can be set.

>Exit Sound selection by pressing the Back key.

>Proceed in the same way to switch Zoom off.

The zoom function stays switched on until you switch it off again or switch the unit to standby.

7.16 EPGplus Electronic Programme Guide

Your digital receiver features an electronic programme guide. This allows you to display programme information related to one or more programmes on your screen.

You can very quickly obtain an overview of the currently running programmes, the programmes of the day or those of the following days.

7

35

Page 35
Image 35
TechniSat HD S2X manual Zoom picture, EPGplus Electronic Programme Guide, Change PIP pictures, Switch off PIP operation