TechniSat HD S2X Display time Information Banner, CI dual decoding, Radio background picture

Models: HD S2X

1 92
Download 92 pages 30.74 Kb
Page 26
Image 26
6.6.2 Display time Information Banner

6

If the function is switched on you can configure four lists of favourites (main list, favourites 1, favourites 2 and favourites 3). The ex-works programming can be found in the main list.

When the function is switched off only the main list is active.

6.6.2 Display time Information Banner

>Use the numeric keys to set the desired display time for the Infobox. This can be varied from 1 second to 15 seconds.

6.6.3 CI dual decoding

The CI dual decoding feature allows you to receive two different encrypted programmes simultaneously, using only one CI module and only a single valid Smartcard.

>Use the left/right arrow keys to select the CI slot holding the CI module for dual decoding. Select CI1, CI2 or CI1+CI2. If you prefer automatic recognition, select auto. The setting off indicates the CI dual decoding feature is switched off.

Please also note Point 7.3.3.

6.6.4 Radio background picture

With this function the picture in the radio mode can be switched off. This is kinder to the screen and you will save on current. Here:

on means the picture is switched on also in radio mode.

off means the picture will be turned off, in radio mode, after about 30 seconds and stays off when a programme is changed.

auto means that the picture will be turned off after about 30 seconds in the radio mode and will briefly automatically appear during a programme change.

>Use the right/left arrow keys to set on, off or auto.

6.6.5 Memory format radio recordings

Here you can select whether radio recordings on the hard drive should additionally be saved in the MP2-format. These can be copied onto an external appliance.

>Use the right/left arrow keys to set PVR + MP2 in order to additionally save the radio recordings in the MP2-format.

6.6.6 Font size

You can change the font size for the EPG long texts:

>Set large or small by using the right/left arrow keys.

6.6.7 Network settings

In this submenu you have the option of adapting the digital receiver to your Ethernet network environment.

Accepting settings

To store the settings made in this menu to memory, please proceed as follows:

>Press the green function key Accept to store the changes made, and to return to the menu Settings.

alternatively:

26

Page 26
Image 26
TechniSat HD S2X Display time Information Banner, CI dual decoding, Radio background picture, Font size, Network settings