software for your digital receiver is available. If a new version of the operating software is available, this will be indicated by a message displayed on screen.
To start an update of the software, simply follow the instructions on screen. When the update of the software has been successfully completed, an appropriate message will be displayed on screen.
9.5.5 Copying settings
You have the facility to copy all the settings such as programme list, antenna settings, etc. of your digital receiver (source, transmitter) to another digital receiver (target, receiver) of the same type, and equipped with the same version of operating software.
>To do this, connect the two receivers by means of a null modem cable.
>Switch on the target receiver.
>Use the arrow keys up/down to mark the line Copy settings and confirm by pressing OK.
The following message will be displayed.
>At the start of the process, press a key on the source receiver. The settings of the source receiver will now be transferred to the target receiver. Please note any messages displayed on screen.
9.6 System configuration
This menu item allows you to see the specific receiver unit data (e.g. the current software version).
>Use the arrow keys up/down to mark this line in the
>Confirm by pressing OK.
>Press the Menu key to return to normal operation.
9.7 Encryption system
Under this menu point you will have access to the
Manual initialisation of the CI-Modules
>By pressing the green function key CI Reset you can manually initialise the CI- Modules.
9
79
