TechniSat HD S2X manual Updating software, Software channel, New software available, Start update

Models: HD S2X

1 92
Download 92 pages 30.74 Kb
Page 78
Image 78
9.5.4 Updating software

9

Accept all programmes

>To accept and transfer all new programmes without a further check, press the yellow function key Automatic.

The programmes will be added to the Favourites list in accordance with predetermined criteria

Reject programme (do not accept)

>If you do not wish to accept the indicated programme, and all the following programmes into the Main Favourites list, press the red function key No.

9.5.4 Updating software

In addition, you have the facility of updating the operating software of your digital receiver via satellite (ASTRA 19° East).

>Use the arrow keys up/down to mark the line Update software.

>Press the OK key to go to the Software update submenu.

>To perform a software update, use the up/down arrow keys to mark the line

Update.

>Use the OK key to set the software update to on.

>In the line Update time use the numeric keys to set the time at which the software is to be updated.

Note:

For the new software to be loaded automatically, the digital receiver must be set to standby mode. The downloading procedure will be indicated by the message “Update S” as well as the percentage of data already downloaded. Do not interrupt this procedure by switching the receiver on or off.

Software channel

If the parameters of the data channel required for downloading the ISIPRO have changed, you can correct them in this menu as described under Point 9.4.4 (manual programme search). Current transponder data can be obtained from your retailer. Generally, under normal circumstances you should not make any changes in this menu.

Start availability test manually

>To check for the presence of new software manually, press the yellow function key

Check.

If new software is available, a note will appear.

Start update

>To download the software, use the up/down arrow keys to mark the Start update field and confirm with OK.

Your receiver will then restart, and will indicate the presence of new software by displaying a message.

9.5.4.1 New software available

Independently of whether you have switched the automatic updating function on or off, the receiver will check each time you switch it on whether a new version of the operating

78

Page 78
Image 78
TechniSat HD S2X Updating software, Software channel, New software available, Start availability test manually