>By pressing the yellow function key Turn to Sat the antenna will be turned to the selected satellite position.
10.5 Deleting a satellite position
To delete a satellite position from the satellite list, proceed as follows:
>Use the arrow keys to mark the field Current satellite list.
>To open the current satellite list, press the OK key.
>Use the up/down arrow keys to select the satellite you wish to delete and confirm with OK.
>Use the arrow keys to mark the field Delete satellite.
>To delete the satellite selected, press the OK key.
>Mark the field OK and confirm by pressing OK
10.6 Reference position
When installing the external installation, the motor must be set to the reference position (0°). You can therefore use the function “Go to reference position” to turn the motor to this position (0°) at any time.
>Press the green function key Ref. position. to turn the antenna automatically to the reference position.
10
85
