marker (G) should be positioned to the left, in the biggest hole (Fig.1).
•Connect the appliance:
-Your appliance has five speed levels and a turbo button. Always begin mixing or kneading at setting 1 initially, then move to setting 2, 3, 4 or 5.
-To knead thick consistent doughs we recommend using setting 5 only.
-You can also increase the speed by pressing the turbo button (A3): this function can be used at all speeds. We recommend that it is only used briefly (a maximum of 30 seconds for thick
consistent doughs).
•After finishing, set the speed control (A2) to “0”. •Disconnect.
•Then press the ejection button (A1) to remove the beaters or mixers.
• Using with the base (H): (According to model)
•Check that the speed control (A2) is set to “0”.
•Insert the rod of each beater (C) or mixer (E) into the corresponding holes and lock into place. The beaters and kneaders have a specific shape, the mixer or beater with the left beater marker
(G)should be positioned to the left, in the biggest hole (Fig.1).
•Place the base (H) on the worktop:
-To raise the arm, unlock by pressing on the button (J) (Fig.4).
-Position the bowl (I) (Fig.4).
-Press on button (J) to unlock the arm and lower it (Fig.5.)
-Place the mixer, fitted with kneaders or beaters, on the hinged arm until your hear it click into place (Fig.6).
•Connect the appliance:
-Your appliance has five speed levels and a turbo button. Always begin mixing or kneading at setting 1initially, then move to setting 2, 3, 4or 5.
-To knead thick consistent doughs we recommend using setting 5 only.
Note:
INSERT THE MIXER BY POSITIONING THE BEATERS OR KNEADERS IN THE NOTCHES (Fig.6)
109