Setting SDHSONET Transmit Parameters
3–80 CTS 710 SONET Test Set User Manual
HDefine your own byte with the buttons next to 1 and 0. Use
the left and right arrow buttons to move the cursor from one
bit to the next. See Figure 3–29.
HWhen you finish editing the byte, select DONE.
Figure 3–29: Editing an Overhead Byte
Editing the V5 Byte
To edit the V5 byte (VT1.5 Mapping Only):
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
TRANSMIT PATH
OVERHEAD Overhead View VT1.5 Overhead
Only bits 5, 6, and 7 (the signal label bits) of the V5 byte are
editable. See Table 3–7.
Setting SDHSONET Transmit Parameters
3–80 CTS 710 SONET Test Set User Manual
HDefine your own byte with the buttons next to 1 and 0. Use
the left and right arrow buttons to move the cursor from one
bit to the next. See Figure 3–29.
HWhen you finish editing the byte, select DONE.
Figure 3–29: Editing an Overhead Byte
Editing the V5 Byte
To edit the V5 byte (VT1.5 Mapping Only):
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
TRANSMIT PATH
OVERHEAD Overhead View VT1.5 Overhead
Only bits 5, 6, and 7 (the signal label bits) of the V5 byte are
editable. See Table 3–7.