Setting SONETSDH Receive Parameters
CTS 710 SONET Test Set User Manual 3–105
To specify the mapping of the received signal:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
RECEIVE RECEIVE
SETTINGS Mapping Bulk Fill
No Mapping
(Equipped)
Bulk Fill
No Mapping
(Unequipped)
DS3
VT1.5
NOTE. Some mappings require options that might not be installed in
your CTS 710. Depending on the mapping you choose, you might
need to set additional parameters.
HSelect Bulk Fill No Mapping (Equipped) to receive an SPE that
is filled with the test pattern specified (on the Test Pattern line)
and where the C2 byte is set to 1.
HSelect Bulk Fill No Mapping (Unequipped) to receive an SPE
that is filled with the test pattern specified (on the Test Pattern
line) and where the C2 byte is set to 0.
HSelect VT 1.5 Async to demap a DS1 signal from the received
signal. See Demapping a Tributary Signal for details.
Setting SONETSDH Receive Parameters
CTS 710 SONET Test Set User Manual 3–105
To specify the mapping of the received signal:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
RECEIVE RECEIVE
SETTINGS Mapping Bulk Fill
No Mapping
(Equipped)
Bulk Fill
No Mapping
(Unequipped)
DS3
VT1.5
NOTE. Some mappings require options that might not be installed in
your CTS 710. Depending on the mapping you choose, you might
need to set additional parameters.
HSelect Bulk Fill No Mapping (Equipped) to receive an SPE that
is filled with the test pattern specified (on the Test Pattern line)
and where the C2 byte is set to 1.
HSelect Bulk Fill No Mapping (Unequipped) to receive an SPE
that is filled with the test pattern specified (on the Test Pattern
line) and where the C2 byte is set to 0.
HSelect VT 1.5 Async to demap a DS1 signal from the received
signal. See Demapping a Tributary Signal for details.