Setting SONETSDH Receive Parameters
3–118 CTS 710 SONET Test Set User Manual
2. Configure the CTS 710 to drop the DCC data bytes:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
RECEIVE TRANSPORT
OVERHEAD External Drop
(see Figure 3–42) None
D1–D3
D4–D12
F1
HSelect None if you do not want to drop the DCC bytes.
HSelect D1–D3 to drop the D1–D3 bytes of the DCC.
HSelect D4–D12 to drop the D4–D12 bytes of the DCC.
HSelect F1 to drop the F1 byte of the DCC.
Figure 3–42: Dropping Data from the DCC
Setting SONETSDH Receive Parameters
3–118 CTS 710 SONET Test Set User Manual
2. Configure the CTS 710 to drop the DCC data bytes:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
RECEIVE TRANSPORT
OVERHEAD External Drop
(see Figure 3–42) None
D1–D3
D4–D12
F1
HSelect None if you do not want to drop the DCC bytes.
HSelect D1–D3 to drop the D1–D3 bytes of the DCC.
HSelect D4–D12 to drop the D4–D12 bytes of the DCC.
HSelect F1 to drop the F1 byte of the DCC.
Figure 3–42: Dropping Data from the DCC