Setting SONETSDH Receive Parameters
3–100 CTS 710 SONET Test Set User Manual
Set
Rate
Set Level
(STS Rates
only)
Set Signal
Structure Specify STS
Under Test Set
Mapping
Set VT Under Test
(Mapping = VT1.5
Async only)
Set Payload
(Mapping=
VT1.5 Async,
DS3 only)
Set Test
Pattern
Set Tributary Drop
(Mapping = VT1.5
Async, DS3 only)
Figure 3–37: Sequence for Setting SONET Signal Parameters When Demapping a
Tributary Signal
Setting the Receive Rate
To set the receive rate:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
RECEIVE RECEIVE
SETTINGS
(see Figure 3–38)
Receive Rate as appropriate
HSelect STS-1, STS-3, OC-1, OC-3, or OC-12 to receive a
SONET signal.
HSelect DS1, DS3, or DS3→DS1 to receive a tributary rate signal.
See page 3–121 for details on setting tributary signal parameters.
Setting SONETSDH Receive Parameters
3–100 CTS 710 SONET Test Set User Manual
Set
Rate
Set Level
(STS Rates
only)
Set Signal
Structure Specify STS
Under Test Set
Mapping
Set VT Under Test
(Mapping = VT1.5
Async only)
Set Payload
(Mapping=
VT1.5 Async,
DS3 only)
Set Test
Pattern
Set Tributary Drop
(Mapping = VT1.5
Async, DS3 only)
Figure 3–37: Sequence for Setting SONET Signal Parameters When Demapping a
Tributary Signal
Setting the Receive Rate
To set the receive rate:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
RECEIVE RECEIVE
SETTINGS
(see Figure 3–38)
Receive Rate as appropriate
HSelect STS-1, STS-3, OC-1, OC-3, or OC-12 to receive a
SONET signal.
HSelect DS1, DS3, or DS3→DS1 to receive a tributary rate signal.
See page 3–121 for details on setting tributary signal parameters.