Setting Tributary SignalPDH Transmit Parameters
CTS 710 SONET Test Set User Manual 3–93
HSelect Recovered to use the clock recovered from an incoming
signal.
HSelect External BITS to use the clock signal from an external
BITS reference. Attach the external BITS reference to the BITS
connector on the rear panel.
HSelect External DSn to use an external DS1/DS3 clock. Attach
the clock to the external clock connector located on the rear
panel.
Setting the Line Clock Offset
To specify the line clock offset:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
TRANSMIT TRANSMIT
SETTINGS LIne Clock Offset Max +100ppm
Stress +1.0ppm
Stress –1.0ppm
USER DEFINED
HSelect USER DEFINED to specify a clock offset different from
the preset choices.
Setting the Transmit Line Code
To specify the transmit line code for the tributary signal:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
TRANSMIT TRANSMIT
SETTINGS Transmit Line
Code as appropriate
Setting Tributary SignalPDH Transmit Parameters
CTS 710 SONET Test Set User Manual 3–93
HSelect Recovered to use the clock recovered from an incoming
signal.
HSelect External BITS to use the clock signal from an external
BITS reference. Attach the external BITS reference to the BITS
connector on the rear panel.
HSelect External DSn to use an external DS1/DS3 clock. Attach
the clock to the external clock connector located on the rear
panel.
Setting the Line Clock Offset
To specify the line clock offset:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
TRANSMIT TRANSMIT
SETTINGS LIne Clock Offset Max +100ppm
Stress +1.0ppm
Stress –1.0ppm
USER DEFINED
HSelect USER DEFINED to specify a clock offset different from
the preset choices.
Setting the Transmit Line Code
To specify the transmit line code for the tributary signal:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
TRANSMIT TRANSMIT
SETTINGS Transmit Line
Code as appropriate