Appendix D: Specifications
D–2 CTS 710 SONET Test Set User Manual
Table D–1: Standard CTS 710 Specifications (Cont.)
Characteristic Description
Spectral Width ≤ 4 nm, 1310 nm (Opt. 03, 04, 06)
≤ 1 nm, 1550 nm (Opt. 05, 06)
Laser Classification Class 1 laser, complies with 21 CFR 1040.10 and
1040.11, complies with IEC 825, Section 9.4
Connectors FC-PC Standard: Optical Connector kit with ST,
SC, and DIN 47256 included
Signal Structure
Standards Compliance Meets the requirements of ANSI T1.105A,
Section 8 and Bellcore GR-NWT-000253
Payload Channel (SPE) One active STS-1 in STS-3 Selection
(The other 2 channels are unequipped)
One active STS-1 in STS-12
(The other 11 channels are unequipped)
One active STS-3c in STS-12
(The other 3 channels are unequipped)
Unequipped Payload C2 byte is set to 00
Internal Pattern Generator
Patterns
Bulk Fill in a selected SPE channel
(STS-1 or STS-3c)
PRBS: 29–1, 215–1, 220–1, 223–1;
All 1s, All 0s, 8-bit programmable word
Errors
Single or Continuous Section BIP (B1)
Line BIP (B2)
Path BIP (B3), Path FEBE
Payload pattern bit
Error Rate Range 1 × 10–3 to 1 × 10–10 with 0.1 resolution1
Alarms Line AIS, Line FERF
Path AIS, Path FERF
Failures LOS, LOF, LOP
Transmitter Clock
Internal Clock
1Depends on error type.
Appendix D: Specifications
D–2 CTS 710 SONET Test Set User Manual
Table D–1: Standard CTS 710 Specifications (Cont.)
Characteristic Description
Spectral Width ≤ 4 nm, 1310 nm (Opt. 03, 04, 06)
≤ 1 nm, 1550 nm (Opt. 05, 06)
Laser Classification Class 1 laser, complies with 21 CFR 1040.10 and
1040.11, complies with IEC 825, Section 9.4
Connectors FC-PC Standard: Optical Connector kit with ST,
SC, and DIN 47256 included
Signal Structure
Standards Compliance Meets the requirements of ANSI T1.105A,
Section 8 and Bellcore GR-NWT-000253
Payload Channel (SPE) One active STS-1 in STS-3 Selection
(The other 2 channels are unequipped)
One active STS-1 in STS-12
(The other 11 channels are unequipped)
One active STS-3c in STS-12
(The other 3 channels are unequipped)
Unequipped Payload C2 byte is set to 00
Internal Pattern Generator
Patterns
Bulk Fill in a selected SPE channel
(STS-1 or STS-3c)
PRBS: 29–1, 215–1, 220–1, 223–1;
All 1s, All 0s, 8-bit programmable word
Errors
Single or Continuous Section BIP (B1)
Line BIP (B2)
Path BIP (B3), Path FEBE
Payload pattern bit
Error Rate Range 1 × 10–3 to 1 × 10–10 with 0.1 resolution1
Alarms Line AIS, Line FERF
Path AIS, Path FERF
Failures LOS, LOF, LOP
Transmitter Clock
Internal Clock
1Depends on error type.