Setting Pointers and Changing Timing
3–150 CTS 710 SONET Test Set User Manual
2. Specify the Offset Mode as follows:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
Offset Mode Line
Payload
HSelect Line to change the transmit line rate. With this setting,
the SPE location (pointer) does not move relative to the
transmitted frame.
HSelect Payload to change the offset of the payload.
3. Specify the frequency offset as follows:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
Frequency Offset Max +100ppm
Stress +4.6ppm
Stress –4.6ppm
Default 0ppm
USER DEFINED
HSelect Max +100ppm to set the frequency offset to the
maximum available amount.
HSelect Stress +4.6ppm to set the frequency offset at the upper
stratum three limit.
HSelect Stress –4.6ppm to set the frequency offset at the lower
stratum three limit.
HSelect Default 0ppm to turn off frequency offset.
HSelect USER DEFINED to set a frequency offset different
from the preset choices.
Setting Pointers and Changing Timing
3–150 CTS 710 SONET Test Set User Manual
2. Specify the Offset Mode as follows:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
Offset Mode Line
Payload
HSelect Line to change the transmit line rate. With this setting,
the SPE location (pointer) does not move relative to the
transmitted frame.
HSelect Payload to change the offset of the payload.
3. Specify the frequency offset as follows:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
Frequency Offset Max +100ppm
Stress +4.6ppm
Stress –4.6ppm
Default 0ppm
USER DEFINED
HSelect Max +100ppm to set the frequency offset to the
maximum available amount.
HSelect Stress +4.6ppm to set the frequency offset at the upper
stratum three limit.
HSelect Stress –4.6ppm to set the frequency offset at the lower
stratum three limit.
HSelect Default 0ppm to turn off frequency offset.
HSelect USER DEFINED to set a frequency offset different
from the preset choices.