Setting SONETSDH Receive Parameters
CTS 710 SONET Test Set User Manual 3–111
HSelect VT #1 to specify the first virtual tributary.
HSelect VT #28 to specify the last virtual tributary.
HSelect Next to change the selection to the next higher virtual
tributary.
HSelect Previous to change the selection to the next lower
virtual tributary.
7. Specify the payload as follows:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
Payload as appropriate
HSelect DS1 Unframed to demap an unframed DS1 signal or a
DS1 signal whose framing is unknown.
HSelect DS1 SF (D4) to demap a DS1 signal (in D4 Super-
frame format) from the payload of the selected virtual
tributary.
HSelect DS1 ESF to demap a DS1 signal (in Extended
Superframe format) from the payload of the selected virtual
tributary.
HSelect DS3 Unframed to demap an unframed DS3 signal or a
DS3 signal whose framing is unknown.
HSelect DS3 C-bit to demap a DS3 signal with C-bit framing.
HSelect DS3 M13 to demap a DS3 signal with M-13 framing.
Dropping a Tributary Signal
To drop a signal it must be demapped, as described previously, and
you must turn on Tributary Drop.
Setting SONETSDH Receive Parameters
CTS 710 SONET Test Set User Manual 3–111
HSelect VT #1 to specify the first virtual tributary.
HSelect VT #28 to specify the last virtual tributary.
HSelect Next to change the selection to the next higher virtual
tributary.
HSelect Previous to change the selection to the next lower
virtual tributary.
7. Specify the payload as follows:
Press Menu
Button Select Menu
Page Highlight
Parameter Select Choice
Payload as appropriate
HSelect DS1 Unframed to demap an unframed DS1 signal or a
DS1 signal whose framing is unknown.
HSelect DS1 SF (D4) to demap a DS1 signal (in D4 Super-
frame format) from the payload of the selected virtual
tributary.
HSelect DS1 ESF to demap a DS1 signal (in Extended
Superframe format) from the payload of the selected virtual
tributary.
HSelect DS3 Unframed to demap an unframed DS3 signal or a
DS3 signal whose framing is unknown.
HSelect DS3 C-bit to demap a DS3 signal with C-bit framing.
HSelect DS3 M13 to demap a DS3 signal with M-13 framing.
Dropping a Tributary Signal
To drop a signal it must be demapped, as described previously, and
you must turn on Tributary Drop.