Field Service 6-11
Figure 6-5 Removing/Installing Cables with Locking-Type Connectors
6.5.1 Removing/Replacing the Notebook Battery Pack
Before performing any of the assembly/disassembly procedures, always disconnect the
AC adapter from the notebook and remove all battery packs. The procedure for removing
and replacing the notebook battery pack is as follows:
1. Turn off the computer and disconnect the AC adapter from the computer.
2. Unlock the battery on each side of the notebook and pull the battery out of
the front of the notebook as shown in Figure 6-6.
3. Replacement is essentially the reverse of Steps 1 and 2 (connector side of
battery goes up).
Unplugging the
Cable
Connecting the
Cable