Field Service 6-29
6.5.17 Removing/Replacing the Display BezelTo remove and replace the Display Bezel Assembly, use the following procedure:
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Use a sharp object to remove the six bezel screw covers and remove the six
screws.
3. Pull out and remove the Display Bezel.
4. Replacement is the reverse of Steps 1 through 3.
Figure 6-22 Removing/Replacing the Display Bezel