2-6 Installation
3. Swing the Docking Lever outward a full 90 degrees from the side of the MPB.
4. Slide the notebook into the MPB, right side first, as shown in Figure 2-3.
Ensure that the docking guides on both the notebook and the MPB are
securely hooked.
5. Rest the notebook on the MPB. Then press and hold the notebook against
the MPB and swing the Docking Latch inward until the Lever Release Latch
locks.
Figure 2-3 Docking the Notebook into the MPB
2.4.1.2 Cabling to the MPB
Refer to Figure 2-4 (MPB Port Assignments) and then connect all desktop devices to the
MPB instead of directly to the notebook as described in Paragraphs 2.4.2 through 2.4.5.
12
34
Open the expansion door
on bottom of notebook Slide release latch on MPB
forward; swing the docking
level outward 90 degrees
Slide notebook into MPB,
right side first; ensure
docking guides are hooked
Press and hold down
notebook and swing the dock
lever in until the release latch
locks