Installation 2-13
Windows for Workgroups, use the WinMode Utility).
5. Install the correct driver, if required (refer to the Monitor Installation
Instructions supplied by the CRT vendor).
2.5 Primary Battery Pack Installation
1. Turn off the computer and disconnect the AC adapter if attached to the
computer.
2. Unlatch the end locks by pushing the endcaps outward with your thumbs.
3. Align battery connector to connector on notebook and insert the battery pack
into the battery compartment; then push the battery in completely until you
feel the contacts engage.
4. Relatch the battery locks on both ends of the battery.
Figure 2-10 Notebook Battery Removal/Replacement
2.6 Installing the AC Power Adapter
Use the following procedures to connect the AC adapter to the system:
Caution: Use only the AC adapter supplied with the computer; other
adapters can damage the unit.
Unlock Battery Pack
Remove Battery
from Front of Notebook
If Battery Lock comes off,
reinstall as shown
Flush
Slide