6-30 Field Service
6.5.18 Removing/Replacing the LCD
To remove and replace the LCD, use the following procedure:
1. Turn off the computer; disconnect the AC power adapter (if it is attached),
and remove the battery pack and PCMCIA cards as described in Paragraphs
6.5.1 and 6.5.2. Also disconnect the MPB (Paragraph 6.5.3) if attached.
2. Remove the Display Bezel as described in Paragraph 6.5.17.
3. Remove three screws securing the LCD Assembly and pull up on the LCD
Panel (Figure 6-23).
4. Tilt the LCD Panel away from the display cover; unplug the LCD Panel from
the Display Cable Assembly (Figure 6-23) and remove the LCD Assembly.
5. Replacement is the reverse of Steps 1 through 4.
Figure 6-23 Removing/Replacing the LCD Assembly