Operating Instructions 3-11
3.8.4 Replacing the battery
If you have a spare, charged battery, you can do one of the following.
♦Insert a secondary battery into the MPB option (if installed).
♦If you already have a battery in a docked MPB, you can replace the primary
battery without turning off the computer.
♦If you cannot insert the spare battery, suspend operations to disk by pressing
Fn+F2 and replace the battery. When you turn on the computer, the computer
returns to the saved state.
3.8.5 Saving to Disk
When the battery power becomes critically low (less than 5% charge remaining), the
computer saves the current state of the computer to disk and turns off. When you turn
the computer on again, the computer restores the state that was saved to disk.