2-12
2.3.2 Return Values/Error Codes in .ini File

The error code is returned to the PC operating system and also is stored in

PRGS430.ini.

File in the [Options] section:

LastResult=0

0 Ok
2Communication failed!
3Target not connected!
4Adapter not connected!
5Wrong JTAG version!
6PUC failed!
7Synchronization with adapter failed!
8The present adapter is not an MSPāˆ’PRGS430!
9Unknown target!
10 Wrong target!
11 No target selected!
12 Target fuse is blown!
13 Blow fuse failed!
14 Missing setting of VCC!
15 Wrong VCC selected!
16 Wrong baudrate!
17 Communication port error!
18 DEVICE.CFG corrupted!
19 General error!
20 The selected range is invalid!
21 Wrong argument!
22 Error during file I/O
23 File type could not be detected!
24 Unexpected end of file!
25 PROJECT.INI corrupted!
26 Vcc voltage too low for selected function!
27 Fuse not release for this device!
101 Error at target address (during erase check or verify)
102 Unknown command line option
103 Command line option out of valid range
104 Filename mismatch
105 Error in device.cfg