Command Line Options
2-11
Operation
Table 2−3.Command Line Options (Continued)Options for Program Command:
/PE:{0,1,2} Option program with erase (flash only)
0: Without erase
1: Main and Info memory
2: Main memory only
/PC:{0,1} Option program with erase check
0: Disable
1: Enable
/PV:{0,1} Option program with verify
0: Disable
1: Enable
/PB:{0,1} Option program with blow fuse (only valid with verify successful)
0: Disable
1: Enable
Options for Erase/Erase Check and Verify Command
/E:{1,2,..} Option erase/erasecheck/verify by file/device/range
1: File
2: Device
3: Range
/ERange:0xXXX,
0xYYYY Option erase/erasecheck/verify range (start: 0xXXXX, length: 0xYYYY)
Options for Read Out Command:
/RO:{1,2} Option read out by device/range
1: Device
2: Range
/RRange:0xXXXX,
0xYYYY Option read out range (start: 0xXXXX, length: 0xYYYY)
/Rfile:file-
name,{1,2} Specifies read out file name
1: TI-TXT
2: Intel-hex
(Default directory should be the last object file directory)
Log Options:
/Log:filename Specifies Log file name
(Default directory should be the PRGS430.exe directory)
/ALog:{0,1} Option accumulative Log file
0: Disable
1: Enable