Preface
Read This First
About This Manual
This document describes the
Notational Conventions
This document uses the following conventions.
-Hexadecimal numbers are shown with the suffix h. For example, the following number is 40 hexadecimal (decimal 64): 40h.
-When referencing specific register bits, the X in the register bit name is replaced with the bit number; for example, GPXDIR refers to the bit field of the GPIO direction register and GP15DIR refers to bit 15 of GPDIR.
-Registers in this document are shown in figures and described in tables.
J Each register figure shows a rectangle divided into fields that represent the fields of the register. Each field is labeled with its bit name, its beginning and ending bit numbers above, and its read/write properties below. A legend explains the notation used for the properties.
J Reserved bits in a register figure designate a bit that is used for future device expansion.
Related Documentation From Texas Instruments
The following documents describe the C6000™ devices and related support tools. Copies of these documents are available on the Internet at www.ti.com. Tip: Enter the literature number in the search box provided at www.ti.com.
TMS320C6000 CPU and Instruction Set Reference Guide (literature number SPRU189) gives an introduction to the TMS320C62xt and TMS320C67xt DSPs, development tools, and
TMS320C6455 Technical Reference (literature number SPRU965) gives an introduction to the TMS320C6455t DSP and discusses the application areas that are enhanced.
SPRU724 | 3 |
