Texas Instruments TVP5154EVM manual Generic I2C Register Map Editor, Memory Map Editor

www.ti.com

WinVCC in Depth

The DM642 I2C registers can be edited using I2C sub-address 0x40. See Section 9 for details about the DM642 registers.

The video encoder module registers can be edited using I2C sub-address 0x54 (default) or 0x56 if the alternate slave address is being used.

Figure 18. Generic I2C Register Map Editor

8.5.2.4Memory Map Editor

The memory map editor (see Figure 19) allows the display and editing of the data memory and hardware registers of the device, such as the scaler setting registers.

To open this, click on Memory Map in the Edit menu and click on the device type to edit. The operation of the memory map editor controls are explained in Table 5.

Figure 19. Memory Map Editor

22 TVP5154EVM User's Guide SLEU069A –February 2006 –Revised July 2006

Submit Documentation Feedback